|
Chemical Process Pumps Covers 8 models with following unique features
Shaft seal 35,445 length ,one coupling bore 22 one Dimensions for end of suction face to center line of discharge 102 mm. one shaft height 135mm, one spacer coupling100 mm one packing size 8mmMax. BKW 23/2900 RPM.
Range of application
- General: Pharmaceutical ,Pollution control, Textile , food condensate, return, sulfuric acid circulation, Stack scrubbers, Filter press feed.
- Chemicals: Caustics transfer, Acid unloading ,Monomer & Polymer transfer & urea, liquid ammonia & liquid nitrogen.
- Primary Metals: Waste Acid recovery, Pickle liquor circulation.
- Petrochemical: Aromatics, NGL, LPG light & reflex tower bottom, Hydrocarbon gas, oil.
- Pulp & Paper: Digester make up, Black Liquor recovery, white liquor , Coating slurries.
- Special designed R/Led pumps for priming systems for effluent neutralizing & disposal.
Range of temperature
- -200 Degree. C to 180 Degree. C
- Range of pressure:
- Q=2 (M)3/H to 1800(M)3/H
- Range of Flow:
- Q=2 (M)3/H to 1800(M)3/H
Design
Features
- Back pull out construction with spacer couplings for rapid assembly &
- dis- assembly on line.
- Fully open impeller with partial shrouds.
- Standard Dimensions/maximum pump & parts interchangeability.
- Low noise level due to fundamental design restrictions on impeller &
- volute cut water clearance.
- Impeller designed on finite element rotational stresses analysis, to explore to give
- a light sturdy Impeller .
- Heavy duty construction.
- External impeller adjustment.
- Hook type shaft sleeve.
- Normal or reinforced shaft & bearings.
- Shaft Designed for overhung concept having first critical speed of rotation ,
- maximum deflection of shaft 0.05 mm at stuffing box face.
|
